Integrated controller

JCKZQ-13M 20A/50Vd.c. four-output sealed integrated controller

This product is widely applicable in defense, scientific research, and industrial control fields, especially suitable for military weapon system pyrotechnic ignition, DC power control, and similar applications.

Brand:

Spu:

JCKZQ-13M

Introduction

Introduction

1、Introduction

The JCKZQ-13M is a four-output sealed integrated controller with independent input and output control for each channel. The controller adopts a metal fusion welding sealed structure .

Dimensions: 45.5 mm × 45.5 mm × 10.5 mm

2.Features

● Optical Isolation

● Fusion Welding Seal

● Field-Effect Transistor Output

● Low Output Voltage Drop

● Four Normally Open Outputs

3.Main Technical Parameters

Technical Parameter		Minimum	Typical	Maximum	Unit
Output Parameters
Output Current				20	A
Output Voltage			50	80	Vd.c.
Output Voltage Drop			0.1	0.2	Vd.c.
Output Leakage Current				1	μA
Transient Voltage		90			Vd.c.
Overload Current				80	A
Input Parameters
Input Voltage	Type:005-50	4	5	7	Vd.c.
Input Voltage	Type:027-50	16	27	32	Vd.c.
Reverse Polarity Voltage	Type:005-50			7	Vd.c.
Reverse Polarity Voltage	Type:027-50			32	Vd.c.
Input Turn-on Voltage	Type:005-50			4	Vd.c.
Input Turn-on Voltage	Type:027-50			16	Vd.c.
Input Turn-off Voltage	Type:005-50	1			Vd.c.
Input Turn-off Voltage	Type:027-50	6			Vd.c.
Input Current	Type:005-50		15	25	mA
Input Current	Type:027-50		20	30	mA
Turn-on Time				2	ms
Turn-off Time				1	ms
Electrical Parameters
Insulation Resistance		1000			MΩ
Dielectric Withstanding Voltage		500			Vr.m.s.
Power Consumption				8	W
Isolation Capacitance				25	pF
Environmental Parameters
Operating Temperature		-55		105	℃
Storage Temperature		-55		125	℃
Shock		14700m/s²,0.5ms
Vibration		294m/s²,10Hz～3000Hz
Random Vibration		30(m/s²)²/Hz,10Hz～2000Hz
Other Parameters
Hermetic Seal		Leak Rate ≤ 5×10⁻³ Pa·cm³/s
Electrostatic Discharge Sensitivity (ESD)				4000	V
Weight				100	g

Notes:

When the load is inductive, a flyback diode must be added.
The controller's output terminals can be connected in series with the load circuit at either end of the power supply, but ensure that the polarity of the relay is not reversed.
The maximum load power supply voltage must not exceed 80 Vd.c., and the peak transient voltage must not exceed 90 Vd.c

Notes:

Integrated controller List

P/N	Description	Pics
JCKZQ-01M	The JCKZQ-01M type sealed integrated controller is of quality grade QJB(Y)/K. This product can be widely used in the fields of national defense, scientific research and industrial control. It is suitable for applications such as ignition of pyrotechnic devices.
JCKZQ-02M	The JCKZQ-02M type sealed integrated controller is a multi-output sealed integrated controller. Each output group adopts a parallel redundant design, with metal fusion welding sealing and oxygen-free copper lead-out terminals. It is of quality grade Y. This product can be widely used in defense, scientific research and industrial control fields. It is suitable for power distribution control of missiles, rockets, etc.
JCKZQ-04MA	JCKZQ-04MA type sealed integrated controller, quality grade Y or QJB(Y)/K. This product can be widely used in the fields of national defense, scientific research, and industrial control, and is suitable for timing control of pyrotechnic ignition, missiles, rockets, and other weapons and equipment.
JCKZQ-04MB	The JCKZQ-04MB type sealed DC integrated controller, quality grade Y. This product can be widely used in the fields of national defense, scientific research and industrial control, and is suitable for ignition of pyrotechnic devices, timing control of weapons and equipment such as missiles and rockets.
JCKZQ-06M	The JCKZQ-06M is an eight-channel output sealed integrated controller. Each input and output group can be independently controlled or combined for control. The controller adopts a metal fusion-welded sealed structure and has a quality grade of Y level. This product can be widely used in defense, scientific research, and industrial control fields, and is suitable for logic signal control in military weapon systems and other applications.
JCKZQ-07M	The JCKZQ-07M is a four-channel output sealed integrated controller. Each input and output group can be independently controlled. It features a hardware self-locking function upon connection. The controller adopts a metal fusion-welded sealed structure and is of grade Y in quality. This product can be widely used in defense, scientific research, and industrial control fields, and is suitable for applications such as ignition of pyrotechnic devices in military weapon systems and control of DC power supplies.
JCKZQ-09M	The JCKZQ-09M type sealed integrated controller has a quality grade of Y level. This product can be widely used in the fields of national defense, scientific research and industrial control, and is suitable for the ignition of pyrotechnic devices and the timing control of weapons and equipment such as missiles and rockets.
JCKZQ-13	The JCKZQ-13M is a four-channel output sealed integrated controller. Each input and output channel is independently controlled. The controller adopts a metal fusion-welded sealed structure and has a quality grade of Y level. This product can be widely used in the fields of national defense, scientific research, and industrial control, and is suitable for applications such as ignition of pyrotechnic devices in military weapon systems and control of DC power supplies.

*** For more product information, please contact the agent.

Automated modern factories

The modern automated factory ensures that all performance indicators of our products are highly consistent, minimizing the differences in each product's parameters as much as possible. This not only guarantees the reliability and consistency of our products but also serves as an important guarantee for the safe and reliable operation of our customers' equipment.

Well-equipped laboratory

We have a well-equipped laboratory for testing and strictly control the quality of our products. This ensures that the qualification rate of the products we deliver to customers reaches 100%.

Wide applications

Military use,Defense, aerospace, automation control, ignition control

50vdc four output sealed integrated controller -0

Our users

Our users span across various industrial sectors.

Why choose us?

Beijing World E To Technology Co., Ltd. is leading supplier of semiconductor products like IGBT moudel,IGBT discretes, IGBT Chips ,ADC/DAC ,Thyristor in China, mainly engaged in the official distribution of the brand of CRRC, Starpower, Techsem NARI.With import and export qualifications and 11 years experience in this industry, we export to Russia, UAE, and many other Europe area.
We have strict requirements for the selection of manufacturers, professional technical teams, and product quality control Ensure the smooth operation of projects for customers in the fields of rail transit, power industry, electric vehicles, motor drive inverters, and frequency converters.

Meanwhile, helping customers customize various thyristors and power assemblies according to their special parameter requirements is another important component Our contract manufacturing and one of our advantages.

Safe delivery

We cooperate with top international freight companies to ensure timely transportation.

At the same time, we carefully package every batch of goods delivered to our customers according to their requirements to ensure that our goods are delivered intact and undamaged.

Shipping packag-1.jpg